刘耀,占丽娜,胡子健,王惠琼

• 1:萍乡学院机械电子工程学院

摘要(Abstract)：

陶瓷光固化成型技术能够制备高精度、复杂几何形状的陶瓷。本文介绍了光固化陶瓷的成型原理及研究进展，同时从陶瓷浆料的流变性能、固化性能、工艺参数与力学性能之间的相互作用关系，阐述了光固化陶瓷在改性机理、光固化机理，以及致密化机理的研究进展，指出了光固化陶瓷材料成型的发展方向。

关键词(KeyWords)： 光固化;陶瓷;成型;固化;应用

Abstract:

Keywords:

基金项目(Foundation): 江西省自然科学基金(20212BAB204048);; 江西省教育厅科技计划项目(GJJ212714)

作者(Author): 刘耀,占丽娜,胡子健,王惠琼

DOI: 10.13958/j.cnki.ztcg.2023.03.009

参考文献(References)：

• [1] XU J, SHI W. Progress in radiation curing marketing and technology[J]. Jouranl of Coatings Technology, 2002, 74(5):67-72.
• [2] BONGIOVANNI R, MONTEFUSCO F, PRIOLA A. High performance UV-cured coatings for wood protection[J].Progress in Organic Coatings, 2002, 45(4):359-363.
• [3] DECKER C. UV-curing chemistry:Past, present and future[J]. Journal of Coatings Technology, 1987, 59(751):97-106.
• [4] BAIPAI M, SHUKLA V, KUMAR A, et al. Film performance and UV curing of epoxy acrylate resins[J]. Progress in Organic Coatings, 2002, 44(4):271-278.
• [5] GOSWAMI A, ANKTI K, BALASHANMUGAM N, et al.Optimization of rheological propertiesof photopolymerization alumina suspensions for ceramicmicrostereolithography[J]. Ceramic International, 2014, 40(2):3655-3665.
• [6] CHEN W, KIRIHARA S, MIYAMOTO Y. Fabrication and Mesaurement of micro three-dimensional Si O2 ceramic for terahertz wave applications[J]. Journal of the American Ceramic Society, 2007, 90(7):2078-2081.
• [7] HE R, DING G, ZHANG K, et al. Fabrication of Si C ceramic arthitectures using stereolithography combined with precusor infiltration and pyrolysis[J]. Ceramics International,2019, 45(11):14006-14014.
• [8] ZHOU W, LI D, WANG H. A novel aqueous ceramic suspensionfor ceramic stereolithography[J]. Rapid Prototyping Journal, 2010, 16(1):29-35.
• [9] BIAN W, LI D, LIAN Q, et al. Fabrication of a bio-inspired beta-tricalcium phosphate/collagen scaffold based on ceramic stereolithography and gel casting for osteochondral tissue engineering[J]. Rapid Prototyping Journal, 2012, 18(1):68-80.
• [10] CHARTIER T, CHAPUT C, DOREAU F, et al. Stereolithography of structural complex ceramic parts[J]. Journal of Materials Science, 2002, 37(6):3141-3147.
• [11] HE R, LIU W, WU Z, et al. Fabrication of complex-shaped zirconia ceramic parts via a DLP-stereolithography-based3D printing method[J]. Ceramic International, 2017, 44(3):3412-3416.
• [12] LIU Y, ZHAN L, HE Y, et al. Stereolithographical fabrication of dense Si3N4 ceramics by slurry optimiation and pressure sintering[J]. Ceramic International, 2020, 46(10):2063-2071.
• [13] ZHANG K, HE R, XIE C, et al. Photosensitive ZrO2 suspensions for stereolithography[J]. Ceramic International, 2019,45(9):12189-12915.
• [14] HAZAN Y, HEINECKE J, WEBER A, et al. High solids loading ceramic colloidal dispersions in UV curable media via comb-polyelectr-olyte surfactants[J]. Journal of Colloid and Interface Science, 2009, 337(1):66-74.
• [15] SUN J, BINNER J, BAI J, et al. Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography[J]. Journal of the European Ceramic Society, 2019, 39(1):1660-1667.
• [16] WANG Z, HUANG C, WANG J, et al. Development of a novel aqueous HA suspension for stereolithography applied to bone tissue engineering[J]. Ceramic International, 2019,45(3):3902-3909.
• [17] LICCIULLI A, CORCIONE C, GRECO A, et al. Formationmechanism of Si3N4 slurry using silane coupling agent as modifier and dispersant[J]. Ceramic International, 2020,46(2):14583-14590.
• [18] WENG Z, ZHOU Y, LIN W, et al. Structure-property ralationship of nano enhanced stereolithography resin for desktop SLA 3D printer[J]. Composites Part A:Applied Science and Manufacturing, 2016, 88(5):234-242.
• [19] LIU Y, CHENG L, LI H, et al. Formationmechanism of Si3N4 slurry using silane coupling agent as modifier and dispersant[J]. Ceramic International, 2020, 46(2):14583-14590.
• [20] JANG J, WANG S, PILGRIM S, et al. Freeform fabrication of ceramics via stereolithography[J]. Journal of the European Ceramic Society, 2000, 83(7):1804-1806.
• [21] TOMECKOVA V, HALLORAN J. Cure depth for photopolymerization of ceramic suspensions[J]. Journal of the European Ceramic Society, 2010, 30(15):3023-3033.
• [22] DING G, HE R, ZHANG K, et al. Stereolithography-based additive manufacturing of gray-colored Si C ceramic green body[J]. Journal of the American Society, 2019,102(71):7198-7209.
• [23] SUN C, ZHANG X. The influences of the material properties on ceramic microstereolithography[J]. Sensors and Actuators A:Physical, 2002, 101(3):364-370.
• [24] BADEV A, ABOULIATIM Y, CHARTIER T, et al. Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers uesd in Stereolithography[J]. Journal of Photochemistry and Photobiology A:Chemistry, 2011,222(1):117-122.
• [25] LIU Y, ZHAN L, WEN L, et al. Effects of particle size and color on Photocuring performance of Si3N4 ceramic slurry by stereolithography[J]. Journal of the European Ceramic Society, 2021, 41(4):2386-2394.
• [26] WU Z, LIU W, WU H, et al. Research into the mechanical properties, sintering mechanism and microstructure evalution of Al2O3-ZrO2 composited fabricated by a stereolithography-based 3D printing method[J]. Materials Chemistry and Physics, 2018, 207(1):1-10.
• [27] CHEN Z, LI D, ZHOU W, et al. Processparameters appraisal of fabricating ceramic parts based on stereolithography using the Taguchi method[J]. Proceedings of the Institution of Mechanical Enggineers, Part B:Journal of Engineeringmanufacture, 2012, 23(5):361-369.
• [28] LIU W, WU H, ZHOU M, et al. Fabrication of fine-grained alumina ceramics by a novel process integrating stereolithography and liquid precursor infiltration processing[J]. Ceramic International, 2016, 42(15):17736-17741.
• [29] ZHOU M, LIU W, WU H, et al. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography-optimization of the the drying and debinding processes[J].Ceramic International, 2016, 42(10):11598-11602.
• [30] XING Z, LIU W, CHEN Y, et al. Effect of plasticizer on the fabrication and properties of alumnia ceramic by stereolithography-basedadditive manufacturing[J]. Ceramic International, 2018, 44(16):19939-19944.
• [31] JANG K, LIU J, FISHER J, et al. Effect of the volume fraction of zirconia suspension on the microstructure and physical properties of products produced by additive manufacturing[J]. Ceramic International, 2019, 35(5):97-106.
• [32] TIAN J, ZHANG Y, GUO X, et al. Preparation and characterization of hydroxyapatite for solid freeform fabrication[J].Ceramic International, 2002, 28(3):299-302.